Huizhou Tianzhuo Chuangzhi Instrument Equipment Co., Ltd.
TIANZHUO CHUANG ZHI INSTRUMENT CO., LTD.
Add to Cart
9.8m/S2 Drop Acceleration Packaging Testing Instruments Electric Contraction Arm
Ista-1a /2A external tank drop test
Drop test of external container, usually using ista-1a or 2A standard established by iata.Most customers will choose the standard of 1A for testing. The test procedure of 1A and 2A is basically the same, but the drop height will be different.
Specifications:
| Model | TZ-HG1500 |
| Height range | 300~1500mm |
| Height display | digital |
| Drop height error | ±10mm |
| The maximum weight of the product | 60Kg |
| The maximum size of the product | 1000×800×1000mm |
| Impact panel size | 1600×1100×20mm |
| The appearance of the machine | 1600×1100×2230mm |
| The size of the control box | 300×350×1100mm |
| Drop mode | surface, edge, Angle |
| The motor power | 1.1KW |
| Net weight | 600 kg |
Drop test procedure
1. First, check the product to make sure that the product being tested is a good product, including appearance and function.
2. Repackage to the original packing state, including the packing belt of the outer case (if any).
3. Choose the right floor, which must be smooth and hard.Such as concrete floor, iron plate, etc.
4. Test in the following order:
| Test Sequence | Parts | Specific Surface, Angle, edge |
| 1 | Angle | for the most vulnerable Angle. If not, test for 2-3-5 |
| 2 | edge | shortest side of the adjacent test Angle |
| 3 | edge | next longest side of the adjacent test Angle |
| 4 | edge | longest side of the adjacent test Angle |
| 5 | surface | minimum surface |
| 6 | surface | Relative minimum surface |
| 7 | surface | A small plane |
| 8 | surface | Relatively minor surface |
| 9 | surface | The bedding face |
| 10 | surface | Relative maximum |
Details
